Sikring og tryghed/Kameraer/Udendørs kameraer

SmartLife udendørskamera

Wi-Fi | Full HD 1080p | Pan tilt | IP65 | Cloud Storage (mulighed) / Internal 16GB | 12 V DC | Med bevægelsessensor | Nattesyn | Hvid

Funktioner

Producentens varenummer: WIFICO20CWT
EAN nummer: 5412810290062
• Intelligent IP-udendørskamera - et trådløst forbundet sikkerhedssystem til ejendommens udendørsområder, der er nemt at installere.
• Full HD-opløsning - giver krystalklare optagelser
• Sluttes nemt direkte til dit Wi-Fi-netværk - der kræves ingen separat hub
• Leveres med et kamerabeslag
• Fuldt understøttet af alle andre produkter i Nedis® SmartLife-serien.
Hjemmeautomation er nu blevet nemmere. Dette brugervenlige, intelligente IP-udendørskamera kan nemt tilsluttes dit eksisterende Wi-Fi-netværk for at overvåge udendørsområderne omkring huset og registrere eventuel lyd eller bevægelse.

Full HD-opløsning
Det optager i Full HD-opløsning (1920 x 1080 pixler) og giver komplet klarhed over de optagne billeder. Hertil kommer, at kameraet er ligeså kraftigt om natten: Med dets nattesynstilstand giver det en rækkevidde på 15,0 m.

Vandtæt
Fuldt indkapslet i et ultrarobust, vandtæt hus har dette IP-kamera en tilstrækkeligt stor, intern hukommelse på 16 GB.

Krystalklart
Kameraet kan optage Full HD-videoer og billeder i 1920x1080 pixler med dets 1/3" CMOS-sensor, giver en krystalklar opløsning og udløses, når der registreres lyde eller bevægelser.

Tovejskommunikation
Det er muligt at kommunikere via kameraet, når tovejs tale og lytning er aktiveret - hvilket betyder, at det kan anvendes på samme måde som en telefon, når folk er inden for rækkevidde.

Nem konfiguration
Et kamerastativ leveres sammen med enheden, og dets hurtigstartvejledning sikrer, at du kan installere det på ingen tid.

Om Nedis SmartLife
Oplev et stort og stadigt voksende udvalg af produkter - som f.eks. pærer, kontakter, fatninger, sensorer og kameraer - der alle kan styres via en brugervenlig og intuitiv app.
Uanset om du er på udkig efter en enkelt intelligent pære eller fatning, eller du vil automatisere hele huset, kan du her opleve, hvor tilgængelig intelligent teknologi er i dag.

Emballage

Pakkens indhold

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Detail mål på pakker Gaveæske med eurolock

Bredde Højde Længde
95 mm 95 mm 195 mm

Logistik dimensionerne

Pakket per Bredde Højde Længde Vægt
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Produktspecifikationer

Bredde 75 mm
Højde 105 mm
Dybde 75 mm
Vægt 350 g
Farve Hvid
Indbygget mikrofon Ja
Indgangsstrøm 1.0 A
Strømkilde type Strømforsyning
Materiale Plastik
Stik Euro / Type C (CEE 7/16)
Cloud optagelsesfunktionalitet Ja
Integrerede højttalere Ja
Kompatibel med Nedis® SmartLife
Betragningsvinkel 110 °
Billedchip 1/3" CMOS
LED 1
Tilbehør Kameraholder
AC Adapter EU Stik
Kapslingsklasse IP65
Strømadapterkabel længde 1.50 m
Maksimal transmissionseffekt 15 dBm
Nattesyn 15 m
Maksimal transmissionsantenneforstærkning 3 dBi
Infrarød nattesyn Ja
Objektiv 2.8 mm
Billeder i sekundet 25 fps
Lagringstype 1 Internal 16GB
Cloud Storage (mulighed)
Enhedens strømindgangsforbindelse DC 5.5 x 2.1 mm
Maksimalt strømforbrug 12 W
Maksimal opløsning Full HD 1080p
Vippevinkel 85 °
Megapixel 2 MPixel
Grader 355 °
Kameradesign PTZ-Camera
Power-over-ethernet support Nej
Fisheye Nej
Med bevægelsessensor Ja
App tilgængelig til Android™
IOS
Frekvensområde 2400 - 2483.5 MHz
Indgangsspænding 12 V DC
Pan tilt Ja
Dimbar Ja
Understøttet trådløs teknologi Wi-Fi
Programmerbar Ja
Driftstemperaturområde -20 - 50 °C
Antal produkter i pakken 1 stk.

Support

Ofte stillede spørgsmål

Vi har fundet følgende spørgsmål til dig på engelsk

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.