Mando a distancia Universal
Preprogramado | 10 Dispositivos | Botón de guía de TV / Botones de memoria | Infrarrojo | Negro
Características
• Plug & play
Si las pilas se sustituyen a los 20 minutos, no es necesario volver a programar el mando, ya que recuerda el dispositivo guardado durante un máximo de 20 minutos.
Embalaje
Contenido del envase
Remote control
Manual
Dimensiones del envase Blíster
Ancho | Alto | Largo |
---|---|---|
240 mm | 240 mm | 40 mm |
Dimensiones logísticas
Envasado por | Ancho | Alto | Largo | Peso |
---|---|---|---|---|
1 | 170 mm | 248 mm | 40 mm | 131 g |
100 | 485 mm | 270 mm | 610 mm | 14220 g |
Especificaciones de los productos
Ancho |
200 mm |
Alto |
50 mm |
Profundidad |
30 mm |
Peso |
74 g |
Color |
Negro |
Materiales |
ABS Goma |
Tipo de fuente de alimentación |
Alimentado por baterias |
Tensión de entrada |
3 V DC |
Tipo de energía de batería |
AAA |
Tecnología de transmisión |
Infrarrojo |
Dispositivos adecuados |
TV Receptor DVB-S / S2 Multimedia |
Tipo remoto |
Universal |
Entrada de código |
Preprogramado |
Funciones de control remoto |
Botón de guía de TV Botones de memoria |
Requiere baterías (no incluidas) |
2x AAA/LR03 |
Número de dispositivos |
10 Dispositivos |
Soporte
Preguntas Frecuentes
Hemos encontrado las siguientes preguntas para usted en inglés
I can't find a working code for my device.
Use the automatic search to find a working code.
1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.