Säkerhet och övervakning/Kameror/Utomhuskameras

SmartLife Utomhus Kamera

Wi-Fi | Full HD 1080p | Panorera lutning | IP65 | Internt 16 GB / Molnlagring (tillval) | 12 V DC | Med rörelsesensor | Nattsikt | Vit

Egenskaper

Tillverkarens artikelnummer: WIFICO20CWT
Streckkod: 5412810290062
• Smart utomhus-IP-kamera - erbjuder ett trådlöst säkerhetssystem som är enkelt att installera för en fastighets utsida.
• Full HD-upplösning - för kristallklara inspelade bilder
• Lätt att ansluta direkt till Wi-Fi-nätverket direkt till Wi-Fi-nätverket - det krävs ingen separat hubb
• Levereras med ett kamerafäste
• Fullt stöd från alla andra produkter i Nedis® SmartLife-serien.
Nu har hemautomation blivit enklare. Den här lättanvända smarta utomhus-IP-kameran kan enkelt anslutas till ditt befintliga Wi-Fi-nätverk för att övervaka områdena utanför ditt hus och registrera alla ljud eller rörelser.

Full HD-upplösning
Den spelar in i Full HD-upplösning (1920 x 1080 pixlar) för fullständig skärpa på de tagna bilderna. Dessutom är kameran lika kraftig på natten tack vare dess bildförstärkare, som ger ett avstånd på 15.0 m.

Vattenfast
Den här IP-kameran är helt innesluten i ett motståndskraftigt vattentätt hölje, och har ett väl tilltaget internminne på 16 GB.

Kristallklart
Kameran spelar in Full HD-videor och bilder på 1920 x 1080 pixlar genom dess 1/3-tums CMOS-sensor för kristallklar upplösning, och utlöses när ljud eller rörelse detekteras.

Tvåvägskommunikation
Det är möjligt att kommunicera via kameran eftersom tvåvägskommunikation (tala och lyssna) är aktiverat - vilket innebär att den kan användas på samma sätt som en telefon när människor är inom räckvidden.

Enkel att installera
Ett kamerafäste levereras med enheten och dess snabbstartsguide garanterar att du har installerat den på nolltid.

Om Nedis SmartLife
Upptäck ett stort och ständigt växande sortiment av produkter - såsom lampor, brytare, uttag, sensorer och kameror - som alla kan styras med en lättanvänd och intuitiv app
Oavsett om du letar efter en enda smart lampa eller ett uttag, eller om du vill automatisera hela huset, kan du upptäcka hur lättillgänglig smart teknik är i dag.

Förpackning

Paketet innehåller

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Storlek på förpackning Presentask med eurolock

Bredd Höjd Längd
95 mm 95 mm 195 mm

Förpackningsstorlek

Antal/kartong Bredd Höjd Längd Vikt
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Produktspecifikationer

Bredd 75 mm
Höjd 105 mm
Djup 75 mm
Vikt 350 g
Färg Vit
Inbygd mikrofon Ja
Ingångsström 1.0 A
Typ av strömkälla Strömadapter
Material Plast
Moln inspelnings funktionalitet Ja
Integrerade högtalare Ja
Kompatibel med Nedis® SmartLife
Betraktningsvinkel 110 °
Bildchip 1/3" CMOS
LED 1
Tillbehör Kamerafäste
Nätadapter EU Kontakt
Inträngningsskydd IP65
Strömadpterns kabellängd 1.50 m
Maximal sändningseffekt 15 dBm
Nattsikt 15 m
Maximal antennförstärkning 3 dBi
Infraröd nattsyn Ja
Lins 2.8 mm
Bilder per sekund 25 fps
Lagringstyp Internt 16 GB
Molnlagring (tillval)
Enhetens ströminmatningsanslutning DC 5.5 x 2.1 mm
Maximal ström konsumtion 12 W
Maximal upplösning Full HD 1080p
Lutningsvinkel 85 °
Megapixel 2 MPixel
Grader 355 °
Kamerans utformning PTZ-kamera
Ström genom Ethernet support Nej
Fisheye Nej
Med rörelsesensor Ja
App tillgänglig för Android™
IOS
Sänd frekvensområdet 2400 - 2483.5 MHz
Inspänning 12 V DC
Panorera lutning Ja
Nätkontakt Euro / Typ C (CEE 7/16)
Dimbar Ja
Trådlös teknologi som stöds Wi-Fi
Programmerbar Ja
Drifttemperaturens omfång -20 - 50 °C
Antal varor i paketet 1 st.

Support

Vanliga frågor

Vi har hittat följande frågor åt dig på engelska

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.