SmartLife Venkovní Kamera
Full HD 1080p | Náklon | IP65 | Cloudové Úložiště (volitelně) / Interní 16 GB | 12 V DC | Se snímačem pohybu | Noční vidění | Bílá
Vlastnosti
• Obsahuje 16 GB interní paměti pro záznam
• Volitelné nahrávání v cloudu pro 100% bezpečné uložení
• Pohybujte kamerou telefonem, abyste mohli pozorovat velkou oblast
• Vodotěsné pouzdro (IP65) pro venkovní zabezpečení
• Odesílá push oznámení do smartphonu při detekci pohybu
• Noční vidění až na 15 metrů díky silným infračerveným diodám LED
• Snadná kombinace se všemi ostatními produkty Nedis SmartLife
Rozlišení Full HD
Prostřednictvím aplikace můžete sledovat a reagovat na vše, co vidíte, v reálném čase. Záznamy můžete ukládat do interní paměti o velikosti 16 GB. Kamera nahrává v rozlišení Full HD (1920x1080 pixelů) pro naprostou čistotu pořízených záběrů. K dispozici je také možnost ukládat videomateriál v naší aplikaci prostřednictvím volitelného cloudového řešení.
Reaguje na pohyb
Kamera reaguje na pohyb, takže když někdo projde kolem kamery Wi-Fi, zareaguje. Pokud chcete, automaticky spustí nahrávání a navíc obdržíte push oznámení na chytrý telefon. Oznámení se zobrazují jako vyskakovací zprávy na smartphonu, aniž byste museli otevírat aplikaci. To znamená, že jste informováni okamžitě a můžete velmi rychle reagovat.
Obousměrná komunikace
Kamera Wi-Fi je vybavena mikrofonem a reproduktorem. Obousměrná zvuková komunikace funguje perfektně, když chcete mluvit s někým, kdo je u vašich dveří. Takto s ním můžete mluvit, i když nejste doma. Kamera má objektiv se záběrem 110°, který umožňuje velký akční rádius sledování.
Snadné nastavení
Kameru Wi-Fi lze nainstalovat bez brány a integrovat ji přímo do bezdrátové sítě - to zjednodušuje instalaci a šetří další náklady. Kamera je napájena prostřednictvím přiložené napájecí jednotky. Kameru Wi-Fi proto můžete nastavit kdekoli v blízkosti elektrické zásuvky. Součástí dodávky je držák pro upevnění na strop nebo zeď.
O Nedis SmartLife
Produkty Nedis SmartLife Wi-Fi se snadno instalují a budou integrovány přímo do vaší sítě Wi-Fi. Objevte širokou a stále se rozšiřující nabídku produktů - jako jsou žárovky, vypínače, zásuvky, senzory a kamery - které lze ovládat prostřednictvím snadno použitelné a intuitivní aplikace. Ať už hledáte jednu chytrou žárovku nebo zásuvku, nebo chcete automatizovat celý dům, zjistěte, jak jsou dnes chytré technologie dostupné.
Spotřebitel musí dodržovat platné zákony a předpisy a musí si být vědom toho, že mohou stanovit omezení pro vytváření a používání snímků z kamer.
Balení
Obsah balení
IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide
Rozměry maloobchodního balení Dárková krabice s eurozávesem
| Šířka | Výška | Délka |
|---|---|---|
| 95 mm | 95 mm | 195 mm |
Logistické rozměry
| Balení | Šířka | Výška | Délka | Hmotnost |
|---|---|---|---|---|
| 1 | 95 mm | 100 mm | 195 mm | 458 g |
| 20 | 220 mm | 490 mm | 400 mm | 9900 g |
| 1 | 95 mm | 100 mm | 195 mm | 458 g |
| 20 | 220 mm | 490 mm | 400 mm | 9900 g |
Specifikace produktu
| Šířka |
75 mm |
| Výška |
105 mm |
| Hloubka |
75 mm |
| Hmotnost |
350 g |
| Barva |
Bílá |
| Vestavěný mikrofon |
Ano |
| Vstupní proud |
1.0 A |
| Typ zdroje napájení |
Síťové napájení |
| Materiál |
Plast |
| Zástrčka |
Euro / Typ C (CEE 7/16) |
| Funkce záznamu v cloudu |
Ano |
| Integrované reproduktory |
Ano |
| Kompatibilní s |
Nedis® SmartLife |
| Úhel záběru |
110 ° |
| Obrazový čip |
1/3" CMOS |
| LED |
1 |
| Příslušenství |
Držák Kamery AC Adaptér EU Zástrčka |
| IP krytí |
IP65 |
| Délka kabelu napájecího adaptéru |
1.50 m |
| Maximální vysílací výkon |
15 dBm |
| Noční vidění |
15 m |
| Maximální zisk antény |
3 dBi |
| Infračervené noční vidění |
Ano |
| Objektiv |
2.8 mm |
| Snímků za sekundu |
25 fps |
| Typ skladování |
Interní 16 GB Cloudové Úložiště (volitelně) |
| Vstupní napájecí konektor(y) |
DC 5,5 x 2,1 mm |
| Maximální spotřeba energie |
12 W |
| Maximální rozlišení |
Full HD 1080p |
| Úhel náklonu |
85 ° |
| Megapixel |
2 MPixel |
| Stupně natočení |
355 ° |
| Provedení kamery |
PTZ Kamera |
| Podpora napájení přes ethernet |
Ne |
| Rybí oko |
Ne |
| Se snímačem pohybu |
Ano |
| Aplikace ke stažení pro |
Android™ IOS |
| Vysílací frekvenční rozsah |
2400 - 2483.5 MHz |
| Vstupní napětí |
12 V DC |
| Náklon |
Ano |
| Stmívatelné |
Ano |
| Programovatelné |
Ano |
| Rozsah provozních teplot |
-20 - 50 °C |
| Počet produktů v balení |
1 kusů |
| Komunikační technologie |
Wi-Fi |
Podpora
Často kladené otázky
Našli jsme vám následující dotazy v angličtině
What is the function of the record button at the app?
The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.
You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.
Can I extend the internal memory with a sd-card?
It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.
See for instructions the FAQ "Does the camera support cloud storage?"
I get an error that my password or SSID is too long.
You can bypass this error message.
- Click on OK and go on with the installation and follow the instructions.
Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.
If the QR-code can't be scanned, you can use the SmartConfig mode.
tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
How much storage does the camera use for 24 hours of recording?
24 hours of recording takes up about 6.5GB on the memory.
How do I save a recording?
Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.
What will happen if my SD-Card / Memory is full?
When you SD-Card or Memory is full, the oldest file will be overwritten.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Does the camera support cloud storage?
Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
Can I stream the livefeed of the camera to a pc?
No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
When I enter the IP address of this camera I see a login screen. How do I log in?
Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
If I subscribe to the cloud service in the VAS menu, does a single subscription work for all my Smartlife camera devices?
No, it only works for the camera device you have subscribed it with.
The Smart installation method does not seem to work, how do I install it?
In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.